Leather Welding Aprons and Sleeves Manufacturer
We make leather welding aprons, welding sleeves, spats, blankets and hoods in Sialkot, Pakistan. Split and chrome leather, built for real spatter, with private label options for distributors, brands and importers.
Protection for the Jobs a Jacket Doesn’t Suit
Not every welding job needs a full leather jacket. At a bench, on a hot day, or for a quick repair, a jacket can feel like overkill, and welders who get too hot simply take it off. That’s where aprons, sleeves and spats earn their place. They put leather exactly where the sparks land and leave the rest of the body free to breathe.
Our range covers the whole picture. Bib aprons for the chest and legs, sleeves for the arms, spats for the boots, a blanket for the floor and nearby equipment, and a leather hood for the head and neck. Mix and match them, and you can protect a welder for almost any job without the weight of full leathers all day.
If you supply welding shops, fabrication yards or PPE stores, this page shows what we make and how buyers usually order. Leather, colour, pockets, fastenings, logo and packaging can all be changed.
Our Welding Protection Range
Six products that cover a welder from head to boots.
Leather welding aprons
Bib aprons in soft split and chrome split leather. Choose six pockets, a chest pocket, a buckle fastening or finished leather straps.
Welding sleeves
Chrome leather and gold split leather sleeves that cover the forearm and upper arm, the part of the body that sits closest to the arc.
Sleeves with neck and chest cover
Soft leather sleeves joined by neck straps or a neck and chest cover, so the arms and upper chest stay protected without a full jacket.
Welding spats
Ankle spats and spat covers that sit over the boot and stop hot slag dropping inside. A small item that makes a big difference.
Welding blankets
A split leather welding blanket that shields floors, nearby machines and anything else that shouldn’t catch a spark.
Leather welding hoods
A leather hood with mesh lining and a velcro closure, covering the head, neck and shoulders under the welding helmet.
Which Welding Protection Do You Need?
A quick way to match the gear to the job.
| Job | Recommended gear | Why |
|---|---|---|
| Bench MIG or TIG, short jobs | Apron and sleeves | Covers the front and arms, and stays cooler than a jacket |
| Stick welding, heavy spatter | Full leather jacket, or apron with sleeves and neck cover | More coverage where spatter is heavy |
| Overhead or out-of-position welds | Jacket or chest-cover sleeves, plus a leather hood | Protects shoulders, neck and head from falling sparks |
| Floor-level or crouching work | Apron and spats | Stops slag landing on the legs and dropping into boots |
| Welding near other equipment | Split leather welding blanket | Shields floors, machines and materials nearby |
Need a full jacket instead? See our welding clothing range and the leather vs FR cotton welding jacket guide.
Leather Welding Aprons: Split vs Chrome Leather
Most welding aprons are made from one of two leathers. Split leather is the thick, slightly rough inner layer of the hide. It’s tough, it shrugs off spatter, and it keeps the price sensible, which is why it shows up in so many welding shops. Chrome leather is chrome-tanned, so it comes out softer and more supple. It drapes better and feels less stiff when the welder bends or kneels.
Neither one is “better” across the board. Split leather suits heavy, messy work where the apron takes a beating. Chrome leather suits welders who move around a lot and want something that feels less like armour. Plenty of distributors stock both, and we make both.
Pockets, straps and fastenings
Small details matter on an apron that gets worn every day. A six pocket apron keeps rods, chalk and small tools close. A single chest pocket keeps things simple. Buckles make the apron quick to adjust, while finished leather straps are comfortable and long-lasting. Tell us how your customers work and we’ll suggest a layout, or send your own design and we’ll match it.
Welding Sleeves: Arm Protection Without the Heat
The arms sit closest to the arc, and they’re often the first place a welder gets burned. A pair of leather welding sleeves fixes that without adding the heat and weight of a full jacket. Pair them with an apron, and the welder is covered at the front and along both arms while the back stays cool.
We make sleeves in chrome leather and in gold split leather. Chrome sleeves are a bit softer and more flexible. Gold split sleeves are thicker and suit heavier spatter. Either way, the glove cuff should overlap the sleeve so sparks roll off rather than in, and our welding glove length guide explains how to get that overlap right.
Sleeves with neck and chest cover
For overhead work, sleeves on their own leave the shoulders and upper chest exposed. Our soft leather sleeves joined with neck straps, or with a full neck and chest cover, close that gap. They’re a popular middle ground for welders who find a jacket too hot but still need cover above the waist.
Welding Spats and Boot Protection
Hot slag has a habit of finding its way into boots, especially when welders crouch or work close to the floor. Spats sit over the top of the boot and the laces, so slag rolls off instead of dropping inside. We make ankle spats and spat covers in leather. They’re light, quick to put on, and one of the cheapest ways to prevent a painful burn.
Welding Blankets for the Work Area
Protection isn’t only about the welder. Sparks and spatter land on floors, benches, nearby machines and stored materials. A split leather welding blanket gives you a heat and spark resistant barrier you can lay down or hang up wherever it’s needed. Fabrication shops and maintenance teams use them to protect equipment during repairs and to keep the work area tidy.
Leather Welding Hoods
A welding helmet protects the face, but the back of the head, the neck and the top of the shoulders are still open to falling sparks, especially on overhead welds. Our leather welding hood covers that area. It has a mesh lining for comfort and a velcro closure, so it fits under most helmets and comes off quickly at the end of a job.
How Aprons, Sleeves and Gloves Work Together
Think of welding protection as layers that overlap. The glove cuff covers the end of the sleeve. The sleeve meets the apron or the chest cover. The apron reaches down over the knees, and the spats cover the boots. Where those layers meet properly, sparks have nowhere to get in. Where they don’t, that’s usually where burns happen.
That’s why many buyers order gloves, aprons and sleeves together. You can find our leather welding gloves in 14 to 24 inch lengths, so it’s easy to match the cuff to the sleeve. For general handling around the shop, our split leather work gloves fill the gap.
Standards: EN ISO 11611 for Welding Clothing
In Europe, protective clothing for welding is usually tested to EN ISO 11611. It splits garments into Class 1, for lighter spatter work such as TIG and low-current MIG, and Class 2, for heavier spatter such as stick welding and high-current MIG. Aprons, sleeves and spats can all be covered by the standard.
If your market needs EN ISO 11611, ask for the test report for the exact item you’re buying. A label on its own doesn’t tell you much. Mention it when you ask for a quote, and we’ll talk through the options for that product.
Caring for Leather Welding Gear
Leather lasts a long time if it’s treated well, and these are good tips to pass on to your customers. Brush off spatter and dust after use. Don’t put leather aprons or sleeves in a washing machine. Wipe them with a damp cloth if needed, then let them dry naturally, away from heaters. Store them flat or hung up rather than folded tightly, so the leather doesn’t crack along the folds.
Building a Welding Protection Range
A simple range covers most customers. Start with a split leather bib apron and chrome leather sleeves as the everyday kit. Add sleeves with neck and chest cover and a leather hood for overhead work. Finish with spats and a welding blanket as add-ons that welding shops buy again and again. Add your logo and packaging, and you have a tidy range that sits nicely next to welding gloves and jackets. Need help planning it? Our private label team can suggest a mix for your market.
Aprons, Sleeves and Accessories From Our Factory
Real products made in Sialkot. Colours, pockets and branding can be changed for your order.
Private Label Welding Aprons and Sleeves
Your logo on the bib, your colours, your pocket layout and your packaging. Most of our welding apron orders carry the buyer’s own brand.
Send your spec
A photo, a sample or a sketch of the apron or sleeve, plus sizes and quantities. You’ll get a quote within 24 hours.
Approve the sample
We make a quick prototype from stock materials first, then the final sample in the right quality, colour and pattern.
Bulk production
Our two factories in Sialkot can make up to 100,000 pieces a month across the range, with checks at every stage.
Each step is explained on our manufacturing services page.
Why Buyers Choose Our Welding Aprons
Leather decides how long an apron lasts, so that’s where we start. Ours comes from Leather Working Group gold members, and we’ve been working with leather in Sialkot for over 20 years.
Our plant is ISO certified, has passed inspections by leading brands, and can make up to 100,000 pieces a month across the range, so repeat orders stay consistent from one shipment to the next.
Kitting welders out from head to toe? Add our leather welding gloves, browse the full welding clothing range, or read more about Saxum Group.
Welding Aprons and Sleeves FAQ
Which leather is best for a welding apron?
Split leather is the most common choice because it is thick and handles spatter well. Chrome leather is a little softer and more flexible. We make aprons in both.
Should I choose an apron or a jacket?
For bench work and lighter welding, an apron with sleeves is cooler and easier to move in. For heavy spatter and overhead work, a full jacket, or an apron with sleeves and neck cover, gives more protection.
Can you add pockets or change the fastening?
Yes. Six pockets, a chest pocket, buckles or leather straps are all options, and we can adjust the layout to your design.
Can you put our logo on aprons and sleeves?
Yes. Printed or embroidered branding, plus your own labels and retail packaging.
Do you make welding spats?
Yes. We make leather ankle spats and spat covers that sit over the boot and stop slag dropping inside.
What is a welding blanket used for?
A welding blanket protects floors, nearby machines and stored materials from sparks and spatter. Ours is made from split leather.
Can I order aprons, sleeves and gloves in one shipment?
Yes. Most buyers order a mix. List the quantity for each item and size when you ask for a quote.
Do you ship worldwide?
Yes. Saxum Group is 100% export-oriented and ships to buyers abroad as a normal part of our work.
How do I get a price?
Send the items, quantities and sizes through our contact page or WhatsApp us on +92 333 8785849. You will get a quote within 24 hours.
Need a Welding Apron Manufacturer You Can Rely On?
Send us the styles, sizes and quantities you need. We will reply with a quote within 24 hours.