Welding Gloves Manufacturer in Pakistan
We’re a welding gloves manufacturer in Pakistan, making leather welding gloves in Sialkot for distributors, brands and importers. MIG gloves, heavy stick gauntlets, goatskin TIG gloves and heat resistant gloves, all with private label options.
Leather Welding Gloves Made for the Way Welders Work
Welding gloves have a hard life. Spatter, heat, grinding dust, and then they get stuffed in a back pocket at lunch. So we don’t try to make one glove that does everything. A TIG welder and a stick welder need almost opposite things from the same pair, and pretending otherwise just gives you a glove nobody really likes.
That’s the whole idea behind our range. Thin goatskin where the welder needs feel. Thick split cowhide and long cuffs where the sparks are heavy. Lining, thread and cuff length picked for the job, not for the catalogue photo.
If you’re a welding gloves supplier, a PPE distributor or a brand building your own line, this page shows what we make and how buyers usually order. Pretty much everything can be changed: leather, colour, length, lining, logo, packaging.
MIG and Stick Welding Gauntlets
Twenty-five split leather gauntlets in our standard range. Each one can be made in your colours, with your logo, lining and cuff length. Tap Get a Quote and the product code goes straight into a WhatsApp message. Unsure which one fits the job? Read our TIG vs MIG vs Stick guide.
SG-WG-18Black Welding Gauntlet with Green Thumb Patch
Black split leather gauntlet with a green leather reinforcement in the thumb crotch, where welders grip the torch. Black hides scorch marks, so the glove still looks presentable after weeks of use.
- Split cowhide gauntlet
- Thumb crotch reinforcement
- Welted seams
SG-WG-19Black Welding Gauntlet with Red Palm
Black split leather with a red reinforced palm and thumb, and red welting along the fingers. Built for MIG and stick work where the palm takes most of the heat and wear.
- Reinforced palm and thumb
- Red welted seams
- Gauntlet cuff
SG-WG-20Navy Black Welding Gauntlet, White Welts
Dark navy split leather with white welts on every finger seam. Welts protect the stitching from sparks, which is often where cheap welding gloves fail first.
- Split cowhide gauntlet
- Welted finger seams
- Plain palm
SG-WG-21Blue Welding Gauntlet with Black Thumb Crotch
Royal blue split leather with a black reinforcement strip around the thumb crotch. A clean, classic MIG gauntlet that balances protection with enough feel for everyday shop work.
- Split cowhide gauntlet
- Thumb crotch reinforcement
- Gauntlet cuff
SG-WG-22Blue Welding Gauntlet with Grey Palm and Cuff
Blue split leather fingers and back, with a grey split leather palm that runs down into the cuff. The two-tone build gives a thick, even palm and an easy-to-recognise look.
- Two-tone split leather
- Full palm panel
- Gauntlet cuff
SG-WG-23Plain Blue Welding Gauntlet
Bright blue split leather from fingertip to cuff, with welted seams. A simple, good-value welding glove that suits MIG work and general hot jobs.
- Split cowhide gauntlet
- Welted seams
- Plain palm
SG-WG-24Gold Welding Gauntlet with Black Welts
Gold split leather with contrasting black welts and a wide gauntlet cuff. Gold is the traditional welding glove colour, and this one looks the part in any welding store.
- Split cowhide gauntlet
- Black welted seams
- Wide cuff
SG-WG-25Plain Grey Welding Gauntlet
Natural grey split leather with no dye, so it’s the most economical option in the range. Popular with fabrication shops that go through a lot of pairs every month.
- Natural split leather
- Gauntlet cuff
- Value option
SG-WG-26Grey Welding Gauntlet with Black Welts
Grey split leather with black welts sewn into the finger seams for extra protection against sparks. A step up from the plain grey glove for buyers who want better seams.
- Natural split leather
- Welted seams
- Gauntlet cuff
SG-WG-27Red Welding Gauntlet with Black Palm Patch
Red split leather with a large black leather patch over the palm and thumb, stitched in a cross pattern. Made for heavy MIG and stick welding where the palm sees a lot of heat.
- Reinforced palm and thumb
- Cross-stitched patch
- Gauntlet cuff
SG-WG-28Red Welding Gauntlet with Reinforced Palm
Bright red split leather with a matching red palm reinforcement, double stitched across the palm. Same strength as a patched glove, with a cleaner single-colour look.
- Matching palm reinforcement
- Welted seams
- Gauntlet cuff
SG-WG-29Deep Red Welding Gauntlet
Deep red split leather with dark welts and a plain palm. A straightforward, hard-wearing gauntlet that suits general welding and hot handling.
- Split cowhide gauntlet
- Welted seams
- Plain palm
SG-WG-30Red Welding Gauntlet with Gold Palm Patch
Red split leather with a gold leather patch covering the palm and thumb. The two colours make it easy to spot the reinforced side, and the patch adds life where gloves wear through.
- Gold palm and thumb patch
- Welted seams
- Gauntlet cuff
SG-WG-31Gold Welding Gauntlet with Grey Cuff Panel
Gold split leather hand with a grey split leather panel on the palm side of the cuff. A practical two-tone build that keeps costs sensible without giving up coverage.
- Two-tone split leather
- Gauntlet cuff
- Welted seams
SG-WG-32Cream Yellow Welding Gauntlet
Soft cream-yellow split leather with a plain palm and gauntlet cuff. A lighter shade that some buyers prefer for their own branding and packaging.
- Split cowhide gauntlet
- Plain palm
- Gauntlet cuff
SG-WG-33Blue Welding Gauntlet with Tan Palm and Knuckle Strap
Blue split leather with a tan leather patch over the palm and thumb, plus a tan strap across the back of the hand. Extra protection front and back for heavier welding work.
- Reinforced palm and thumb
- Knuckle strap
- Gauntlet cuff
SG-WG-34Orange Gold Welding Gauntlet with Black Thumb
Orange-gold split leather with a black reinforcement around the thumb and palm edge. The thumb is the part that rubs the torch most, so this is where the extra leather goes.
- Thumb and palm reinforcement
- Welted seams
- Gauntlet cuff
SG-WG-35Orange Welding Gauntlet with Black Palm Patch
Bright orange split leather with a black cross-stitched patch over the palm and thumb. A strong, highly visible gauntlet for MIG and stick welding.
- Reinforced palm and thumb
- Cross-stitched patch
- Gauntlet cuff
SG-WG-36Orange Welding Gauntlet with Red Palm and Cuff Stripe
Orange split leather with a red palm reinforcement and a red stripe running across the cuff. A distinctive design that works well as a premium line in a private label range.
- Red palm reinforcement
- Cuff stripe detail
- Gauntlet cuff
SG-WG-37Gold Welding Gauntlet with Black Thumb Patch
Gold split leather with a black leather patch on the thumb and palm edge. A classic welding gauntlet with the reinforcement placed where the torch handle sits.
- Thumb reinforcement
- Welted seams
- Gauntlet cuff
SG-WG-38Brown Long Welding Gauntlet with Black Palm and Fingers
Taupe-brown split leather with black reinforcement over the palm, thumb and two fingers, and a long cuff that reaches further up the forearm. Built for heavy stick welding and gouging.
- Palm, thumb and finger reinforcement
- Long gauntlet cuff
- Heavy duty
SG-WG-39Teal Welding Gauntlet with Red Palm and Fingertips
Teal split leather with red leather reinforcement on the palm, thumb and fingertips. Fingertips wear fast on welding gloves, so this design protects them too.
- Palm and fingertip reinforcement
- Long gauntlet cuff
- Welted seams
SG-WG-40Gold Welding Gauntlet with Elastic Wrist
Gold split leather with an elasticated wrist and a bound cuff edge. The elastic keeps the glove snug, so it doesn’t slide down mid-weld and lets fewer sparks inside.
- Elasticated wrist
- Bound cuff edge
- Split cowhide
SG-WG-41Gold Welding Glove with Extended Grey Cuff
Gold split leather hand with a long grey split leather cuff that covers more of the forearm. Useful for overhead work, where sparks fall onto the arms.
- Extended cuff
- Reinforced palm
- Two-tone split leather
SG-WG-42Blue and Black Welding Gauntlet with Padded Palm
A blue split leather front with a padded, contoured palm reinforcement, and a black back and cuff. Extra palm padding helps when handling hot metal between welds.
- Padded palm reinforcement
- Two-tone split leather
- Gauntlet cuff
Prices depend on leather, lining, size mix, branding and quantity. Send us the product code and your quantities and we will quote within 24 hours.
TIG Welding Gloves in Grain Leather
Soft grain leather on the hand for feeling the filler rod, split leather on the cuff for heat. Not sure between Grade A and AB? Our Grade A vs Grade AB guide explains the difference.
SG-TG-43White Grain Leather TIG Glove, Grey Split Cuff
Soft white grain leather on the hand for fine control of the filler rod, with a grey split leather cuff to cover the wrist. The everyday TIG glove in our range.
- Grain leather hand
- Split leather cuff
- High dexterity
SG-TG-44Reinforced Grain Leather Welding Glove, Gold Patches
White grain leather with gold split leather patches over the palm, fingers and thumb, an elasticated wrist and a gold cuff. More protection than a plain TIG glove while keeping good finger feel. Suits MIG and TIG.
- Grain leather with split patches
- Elastic wrist
- Gold split cuff
SG-TG-45TIG Glove with White Grain Palm and Gold Back
White grain leather palm for feel, with a gold split leather back and cuff for heat. A practical mix that many welders like for long TIG sessions.
- Grain leather palm
- Split leather back
- Gold cuff
SG-TG-46Long Cuff White Grain TIG Glove
All white grain leather hand with a long grey split cuff that reaches further up the arm. Clean, soft and simple, with extra forearm cover.
- Grain leather hand
- Long split cuff
- High dexterity
SG-TG-47Grain Leather TIG Glove with Grey Palm Patches
White grain leather fingers with grey split leather patches on the palm and finger bases, and a grey back and cuff. The patches add wear resistance without making the fingers stiff.
- Grain fingers, split patches
- Split leather cuff
- Reinforced palm
SG-TG-48Grain Leather TIG Glove with Gold Patches and Cuff
White grain leather hand with gold split leather patches on the palm and finger bases, plus a gold back and cuff. A warm-coloured, hard-wearing TIG glove.
- Grain leather hand
- Gold split reinforcement
- Gold cuff
SG-TG-49Grain Leather TIG Glove with Blue Patches
White grain leather fingers with blue split leather patches on the palm and back, and a blue cuff. A strong-looking glove that stands out in a private label range.
- Grain leather hand
- Blue split reinforcement
- Blue cuff
SG-TG-50TIG Glove with Grain Palm, Blue Back and Cuff
White grain leather palm and fingers, with a blue split leather back and a long blue cuff. Soft where you grip, tougher where the heat comes from.
- Grain leather palm
- Blue split back
- Long cuff
SG-TG-51White Grain TIG Glove with Black Cuff
White grain leather hand with a black split leather cuff. The dark cuff hides marks and gives the glove a smart, two-tone finish.
- Grain leather hand
- Black split cuff
- High dexterity
SG-TG-52Tan Grain Leather Welding Glove, Brown Cuff
Tan grain leather on the hand with a brown split leather cuff. A natural, premium look that suits retail and gift-style packaging as well as workshop use.
- Tan grain leather hand
- Brown split cuff
- Premium finish
SG-TG-53White TIG Glove with Black Thumb Crotch Patch
White grain leather with a black reinforcement at the thumb crotch, where TIG welders often rest the torch. Grey split cuff for wrist cover.
- Thumb crotch reinforcement
- Grain leather hand
- Split cuff
SG-TG-54Plain White Grain Leather TIG Glove
The simplest TIG glove we make. Plain white grain leather hand, grey split cuff, nothing extra. Light, soft and easy to brand.
- Grain leather hand
- Split leather cuff
- Light weight
Grain leather can be goatskin or cowhide, in Grade A or Grade AB. Tell us the code and the grade you want, and we will quote within 24 hours.
Short Cuff Welding Gloves
For bench work, grinding and quick jobs where a long gauntlet just gets in the way.
SG-WG-16Green Short Cuff Welding Glove with Gold Palm Patch
A short cuff welding glove in dark green split leather, with a gold leather patch over the palm and thumb. Handy for light welding, grinding and hot work at the bench where a long gauntlet just gets in the way.
- Split cowhide
- Gold palm and thumb patch
- Short cuff
SG-WG-17Blue Short Cuff Welding Glove
Blue split leather with welted seams and a short cuff. Light enough for quick jobs, tough enough for spatter. Many buyers stock it next to a full gauntlet so welders can pick the right length.
- Split cowhide
- Welted seams
- Short cuff
Prices depend on leather, lining, size mix, branding and quantity. Send us the product code and your quantities and we will quote within 24 hours.
Our Welding Glove Range
Four families of gloves, each built around a different kind of heat.
MIG welding gloves
Usually 14 inches, in split or grain cowhide with a cotton or fleece lining. Enough padding for spatter, enough feel for the trigger. They come in blue, red and black options, with or without a reinforced palm.
Stick and heavy duty gauntlets
16, 18 and 24 inch gauntlets in thick split leather, lined, often with a double palm, thumb and fingers. Made for stick welding, gouging and overhead work where molten metal lands on the forearm.
TIG welding gloves
Thin goatskin in Grade A or Grade AB, with a split leather cuff. TIG is about control, so the palm stays soft and the fingertips stay sensitive enough to feed the filler rod.
Heat resistant and aluminized gloves
One finger and five finger heat resistant mittens, plus aluminized gloves that reflect radiant heat. Handy near furnaces, in foundries and for moving hot parts.
Which Welding Glove for Which Job?
A quick guide we give buyers when they plan a range.
| Process | Glove | Leather | Typical length |
|---|---|---|---|
| TIG | TIG glove | Goatskin, Grade A or AB | 14 inch |
| MIG, light to medium | MIG glove | Cowhide grain or split, lined | 14 inch |
| MIG high amp, general stick | Gauntlet | Split cowhide, lined | 16 inch |
| Heavy stick, gouging | Heavy gauntlet | Thick split, double palm | 18 inch |
| Overhead, cutting, foundry | Long gauntlet | Thick split, lined | 24 inch |
| Radiant heat | Aluminized or heat resistant glove | Aluminized or heat resistant material | Varies |
Want the longer version? Read our TIG vs MIG vs Stick welding gloves guide, the welding glove length guide, or Grade A vs Grade AB TIG gloves.
Private Label Welding Gloves
Most buyers want their own brand on the glove, and that is everyday work for us. Logo on the cuff, your colours, your sizing, header cards and retail packaging.
Send your spec
A photo, a sample or a sketch of the glove, plus sizes and quantities. You’ll get a quote within 24 hours.
Approve the sample
We make a quick prototype from stock materials first, then the final sample in the right quality, colour and pattern.
Bulk production
Our two factories in Sialkot can make up to 100,000 pieces a month across the range, with checks at every stage.
More detail on each step is on our manufacturing services page.
Why Buyers Choose Our Welding Gloves
We’ve been making leather gloves for over 20 years, and the company is 100% export-oriented, so shipping deadlines and paperwork are part of a normal week here. The plant is ISO certified and has passed inspections by leading brands.
We have 20+ CE certified products, and our leather comes from Leather Working Group gold members. If your market needs EN 12477, tell us when you ask for a quote and we’ll talk through testing for that model.
Buying for a whole crew? Pair the gloves with our leather welding jackets, aprons and sleeves, or browse our full range of leather work gloves. Many buyers also order welding gloves from Sialkot alongside our split leather work gloves.
Welding Gloves FAQ
Do you make TIG, MIG and stick welding gloves?
Yes, all three, plus heat resistant and aluminized gloves. Each one uses a different leather and length, because each process throws a different kind of heat.
Which leather do you use for welding gloves?
Goatskin for TIG gloves, where feel matters most. Cowhide grain and split for MIG and stick gloves, where thickness matters more. All of it comes from Leather Working Group gold member tanneries.
Which glove lengths can you make?
14, 16, 18 and 24 inch are our usual lengths. If you need something in between, ask us and we will look at the pattern.
Can you put our logo on the gloves?
Yes. Printed or embroidered on the cuff, with your own colours, labels and packaging.
How do I get a price?
Send the style, quantity and sizes through our contact page or WhatsApp us on +92 333 8785849. You will get a quote within 24 hours.
Looking for a Welding Gloves Supplier You Can Rely On?
Tell us what your welders need and how many pairs. We will come back with a quote within 24 hours.